Are you tired of dealing with a cluttered entertainment center or a TV that takes up too much space in your living room? Installing a full motion TV wall mount is a great way to free up space, improve the aesthetic of your room, and enhance your viewing experience. In this article, we will walk you through the process of installing an ONN full motion TV wall mount, providing you with a comprehensive guide to help you complete the task with ease.
Pre-Installation Checklist
Before you start the installation process, it’s essential to ensure that you have everything you need. Here’s a checklist to help you prepare:
- ONN full motion TV wall mount
- TV (compatible with the wall mount)
- Drill and bits
- Wall anchors (provided with the wall mount)
- Stud finder
- Level
- Measuring tape
- Pencil and marker
- Socket wrench or Allen wrench (depending on the type of mount)
Choosing the Right Wall Mount
If you haven’t already purchased your ONN full motion TV wall mount, make sure to choose the right one for your TV. Consider the following factors:
- TV size and weight: Ensure that the wall mount is compatible with your TV’s size and weight.
- Wall type: If you have a concrete or brick wall, you may need a specialized wall mount or additional hardware.
- Viewing angle: If you want to be able to tilt or swivel your TV, look for a full motion wall mount.
Step 1: Plan the Installation
Now that you have everything you need, it’s time to plan the installation. Here are the steps to follow:
- Determine the wall stud location: Use a stud finder to locate the wall studs behind your drywall. This is essential to ensure that your wall mount is securely attached to the wall.
- Measure the TV and wall mount: Measure the width of your TV and the wall mount to determine the best placement.
- Mark the wall: Use a pencil to mark the spot where you want to install the wall mount. Make sure it’s level and aligned with the wall stud.
Understanding Wall Studs
Wall studs are the vertical wooden beams behind your drywall that provide support for your walls. They are usually spaced 16 inches on center, which means that the center of one stud is 16 inches away from the center of the next stud. When installing a wall mount, it’s essential to attach it to a wall stud to ensure that it can hold the weight of your TV.
Step 2: Drill Pilot Holes
Once you have marked the wall, it’s time to drill pilot holes for the wall anchors. Here are the steps to follow:
- Drill pilot holes: Use a drill bit to create pilot holes for the wall anchors. Make sure the holes are level and aligned with the wall stud.
- Use a level: Double-check that the holes are level to ensure that your wall mount is installed correctly.
Types of Wall Anchors
There are several types of wall anchors available, including:
- Plastic wall anchors: These are the most common type of wall anchor and are suitable for most drywall installations.
- Metal wall anchors: These are more heavy-duty and are suitable for concrete or brick walls.
- Molly bolts: These are a type of wall anchor that expands when tightened, providing a secure hold in drywall.
Step 3: Install Wall Anchors
Now that you have drilled pilot holes, it’s time to install the wall anchors. Here are the steps to follow:
- Insert wall anchors: Insert the wall anchors into the pilot holes, making sure they are seated properly.
- Tighten wall anchors: Use a screwdriver or wrench to tighten the wall anchors until they are snug against the wall.
Tightening Wall Anchors
When tightening wall anchors, make sure not to overtighten them. This can damage the drywall or strip the threads. Instead, tighten them until they are snug against the wall, then stop.
Step 4: Attach Wall Mount to Wall
Now that the wall anchors are installed, it’s time to attach the wall mount to the wall. Here are the steps to follow:
- Attach wall mount: Attach the wall mount to the wall anchors, making sure it is level and secure.
- Tighten screws: Use a screwdriver or wrench to tighten the screws that hold the wall mount to the wall anchors.
Types of Wall Mounts
There are several types of wall mounts available, including:
- Fixed wall mounts: These are the most basic type of wall mount and do not allow for any movement.
- Tilt wall mounts: These allow you to tilt your TV up or down for better viewing.
- Full motion wall mounts: These allow you to tilt, swivel, and rotate your TV for maximum flexibility.
Step 5: Attach TV to Wall Mount
Now that the wall mount is attached to the wall, it’s time to attach your TV. Here are the steps to follow:
- Attach TV bracket: Attach the TV bracket to the back of your TV, making sure it is level and secure.
- Hang TV: Hang the TV on the wall mount, making sure it is level and secure.
TV Bracket Types
There are several types of TV brackets available, including:
- Fixed TV brackets: These are the most basic type of TV bracket and do not allow for any movement.
- Tilt TV brackets: These allow you to tilt your TV up or down for better viewing.
- Full motion TV brackets: These allow you to tilt, swivel, and rotate your TV for maximum flexibility.
Step 6: Test the Installation
Now that the TV is attached to the wall mount, it’s time to test the installation. Here are the steps to follow:
- Turn on TV: Turn on your TV to make sure it is working properly.
- Test movement: Test the movement of your TV to make sure it is smooth and secure.
Troubleshooting Common Issues
If you encounter any issues during the installation process, here are some common problems and solutions:
- TV is not level: Check that the wall mount is level and adjust as necessary.
- TV is not secure: Check that the wall anchors are tightened properly and adjust as necessary.
Conclusion
Installing an ONN full motion TV wall mount is a relatively straightforward process that can be completed with a few tools and some basic knowledge. By following the steps outlined in this article, you can ensure a safe and secure installation that will provide years of trouble-free service. Remember to always follow the manufacturer’s instructions and take necessary safety precautions to avoid injury or damage.
What tools do I need to mount my ONN TV?
To mount your ONN TV, you will need a few basic tools. These include a drill, a level, a stud finder, a pencil, and a screwdriver. You may also need a socket wrench or Allen wrench, depending on the type of mount you have. It’s also a good idea to have a ladder or step stool on hand to help you reach the wall.
In addition to these tools, you will also need the mounting hardware that came with your TV wall mount. This typically includes a set of screws, bolts, and washers. Make sure to read the instructions carefully and follow the manufacturer’s recommendations for the type of screws and bolts to use.
How do I choose the right wall mount for my ONN TV?
Choosing the right wall mount for your ONN TV depends on several factors, including the size and weight of your TV, the type of wall you have, and the level of adjustability you need. Consider a full-motion mount if you want to be able to swivel and tilt your TV to different angles. If you have a larger TV, look for a mount that is rated for its weight.
It’s also important to consider the type of wall you have. If you have a drywall or plaster wall, you will need a mount that is designed for these types of walls. If you have a concrete or brick wall, you will need a mount that is designed for these types of walls. Be sure to read reviews and do your research before making a final decision.
How do I locate the wall studs in my wall?
Locating the wall studs in your wall is an important step in mounting your ONN TV. You can use a stud finder to locate the studs, or you can knock gently on the wall to find the studs. Studs are usually spaced 16 inches on center, so if you find one stud, you can measure 16 inches to find the next one.
Once you have located the studs, use a pencil to mark their location on the wall. This will help you determine where to drill your holes for the mount. Make sure to double-check your measurements to ensure that your marks are accurate.
How do I drill holes in the wall for the mount?
Drilling holes in the wall for the mount can be a bit tricky, but with the right tools and a little patience, you can do it safely and effectively. Use a level to ensure that your drill is straight, and a stud finder to ensure that you are drilling into a stud. Start with a small pilot hole and then gradually increase the size of the hole as needed.
Be careful not to drill too deeply, as this can damage the wall or surrounding structures. Use a drill bit that is designed for your type of wall, and apply gentle to moderate pressure. If you are unsure or uncomfortable drilling holes in the wall, consider hiring a professional to do the job for you.
How do I attach the mount to the wall?
Attaching the mount to the wall is a critical step in the installation process. Start by holding the mount against the wall and marking the location of the holes with a pencil. Then, use a drill to make pilot holes for the screws or bolts. Insert the screws or bolts into the holes and tighten them firmly, but do not overtighten.
Make sure the mount is level and securely attached to the wall before proceeding. If you are using a full-motion mount, test it to make sure it is working smoothly and that the TV is securely attached. If you are unsure or uncomfortable attaching the mount to the wall, consider hiring a professional to do the job for you.
How do I attach the TV to the mount?
Attaching the TV to the mount is the final step in the installation process. Start by locating the mounting holes on the back of the TV. These are usually marked with a diagram or label. Then, attach the mounting bracket to the TV using the screws or bolts provided.
Once the bracket is attached, hang the TV on the mount and adjust it to the desired position. Make sure the TV is level and securely attached to the mount before releasing it. If you are using a full-motion mount, test it to make sure it is working smoothly and that the TV is securely attached.
What safety precautions should I take when mounting my ONN TV?
When mounting your ONN TV, there are several safety precautions you should take to avoid injury or damage. First, make sure the TV is turned off and unplugged before starting the installation process. Then, use a ladder or step stool only on a firm, level surface, and always maintain three points of contact.
Be careful when handling the TV, as it can be heavy and may cause injury if dropped. Use a friend or family member to help you lift and hold the TV in place while you attach it to the mount. Finally, make sure the mount is securely attached to the wall and the TV is securely attached to the mount before releasing it.