Are you tired of dealing with a cluttered entertainment center or a TV that’s stuck in one place? Look no further than the ONN full motion spring assisted TV mount. This versatile and easy-to-use mount allows you to swivel, tilt, and adjust your TV to the perfect viewing angle, all while keeping your cables organized and out of sight. In this article, we’ll walk you through the process of installing an ONN full motion spring assisted TV mount, so you can enjoy your favorite shows and movies in comfort and style.
Before You Begin: Preparing Your TV and Mount
Before you start the installation process, there are a few things you’ll need to do to prepare your TV and mount.
Gather Your Tools and Materials
To install your ONN full motion spring assisted TV mount, you’ll need the following tools and materials:
- The ONN full motion spring assisted TV mount itself
- A drill and bits
- A level
- A stud finder
- A pencil and marker
- A screwdriver (both flathead and Phillips)
- Wall anchors (if necessary)
- Cables and cable ties (for organizing your cables)
Choose the Right Wall Type
The ONN full motion spring assisted TV mount is designed to work with a variety of wall types, including drywall, plaster, and wood. However, the type of wall you have will affect the installation process, so it’s essential to determine what type of wall you’re working with before you begin.
If you have a drywall or plaster wall, you’ll need to use wall anchors to secure the mount. These anchors will provide extra support and prevent the mount from pulling out of the wall. If you have a wood wall, you can screw the mount directly into the wood.
Locate the Wall Studs
To ensure that your mount is securely attached to the wall, you’ll need to locate the wall studs. You can use a stud finder to do this. Once you’ve found the studs, mark their location with a pencil.
Installing the Mount
Now that you’ve prepared your TV and mount, it’s time to start the installation process.
Attach the Mounting Plate to the TV
The first step in installing the ONN full motion spring assisted TV mount is to attach the mounting plate to the back of your TV. This plate is usually included with the mount and is designed to fit your specific TV model.
To attach the mounting plate, follow these steps:
- Locate the mounting holes on the back of your TV. These holes are usually located near the top and bottom of the TV.
- Place the mounting plate over the holes and screw it into place using the screws provided.
- Make sure the plate is securely attached to the TV.
Attach the Mount to the Wall
Once the mounting plate is attached to the TV, it’s time to attach the mount to the wall.
- Hold the mount against the wall and use a level to ensure it’s straight.
- Mark the location of the mounting holes with a pencil.
- Drill pilot holes into the wall at the marked locations.
- If you’re using wall anchors, insert them into the pilot holes.
- Screw the mount into place using the screws provided.
Attach the TV to the Mount
Now that the mount is attached to the wall, it’s time to attach the TV.
- Hold the TV against the mount and ensure it’s securely attached.
- Use the screws provided to attach the TV to the mount.
- Make sure the TV is level and securely attached to the mount.
Adjusting the Mount
Once the TV is attached to the mount, you can adjust the mount to your desired viewing angle.
Tilting the TV
To tilt the TV, follow these steps:
- Locate the tilt adjustment mechanism on the mount. This is usually a small lever or screw.
- Turn the lever or screw to adjust the tilt of the TV.
- Make sure the TV is at a comfortable viewing angle.
Swiveling the TV
To swivel the TV, follow these steps:
- Locate the swivel adjustment mechanism on the mount. This is usually a small lever or screw.
- Turn the lever or screw to adjust the swivel of the TV.
- Make sure the TV is at a comfortable viewing angle.
Adjusting the Spring Assisted Mechanism
The ONN full motion spring assisted TV mount features a spring assisted mechanism that allows you to easily adjust the TV’s position. To adjust this mechanism, follow these steps:
- Locate the spring assisted mechanism on the mount. This is usually a small lever or screw.
- Turn the lever or screw to adjust the tension of the spring.
- Make sure the TV is at a comfortable viewing angle.
Organizing Your Cables
One of the benefits of the ONN full motion spring assisted TV mount is its ability to keep your cables organized and out of sight. To take advantage of this feature, follow these steps:
- Locate the cable management system on the mount. This is usually a small compartment or clip.
- Route your cables through the compartment or clip.
- Use cable ties to secure the cables in place.
- Make sure the cables are organized and out of sight.
Troubleshooting Common Issues
If you encounter any issues during the installation process, don’t worry. Here are some common issues and their solutions:
- Issue: The mount is not level.
- Solution: Check that the mount is properly attached to the wall and that the TV is securely attached to the mount. Use a level to ensure the mount is straight.
- Issue: The TV is not securely attached to the mount.
- Solution: Check that the screws are properly tightened and that the TV is securely attached to the mount.
By following these steps and troubleshooting common issues, you can ensure a successful installation of your ONN full motion spring assisted TV mount. With its easy-to-use design and versatile features, this mount is the perfect solution for anyone looking to upgrade their home entertainment system.
What is the weight limit of the ONN Full Motion Spring Assisted TV Mount?
The ONN Full Motion Spring Assisted TV Mount is designed to support a wide range of TV sizes and weights. The weight limit of the mount varies depending on the specific model, but most ONN Full Motion Spring Assisted TV Mounts can support TVs weighing up to 80 pounds. It’s essential to check the weight limit of your specific mount before purchasing to ensure it can support the weight of your TV.
Before installing the mount, make sure to check the weight of your TV and compare it to the weight limit of the mount. If your TV exceeds the weight limit, you may need to consider a different mount or consult with a professional for assistance. Additionally, ensure that the wall where you plan to install the mount can support the weight of the TV and the mount itself.
What tools do I need to install the ONN Full Motion Spring Assisted TV Mount?
To install the ONN Full Motion Spring Assisted TV Mount, you will need a few basic tools. These include a drill, a level, a stud finder, a screwdriver, and a wrench. You may also need a pencil and a marker to mark the wall where you plan to install the mount. Make sure to have all the necessary tools before starting the installation process to avoid any delays or complications.
It’s also a good idea to have a friend or family member assist you with the installation, especially if you have a larger TV. This will make it easier to lift and maneuver the TV into place. Additionally, if you’re not comfortable with DIY projects or if you’re unsure about any part of the installation process, consider consulting a professional for assistance.
How do I find the wall studs to install the ONN Full Motion Spring Assisted TV Mount?
Finding the wall studs is a crucial step in installing the ONN Full Motion Spring Assisted TV Mount. To find the wall studs, you can use a stud finder, which is a specialized tool that detects the location of wall studs. You can also knock gently on the wall to find the studs, as they will produce a more solid sound than the drywall.
Once you’ve located the wall studs, use a pencil to mark their location on the wall. This will help you determine the best place to install the mount. Make sure to install the mount into the wall studs, as this will provide the necessary support and stability for the TV. If you’re unsure about finding the wall studs or installing the mount, consider consulting a professional for assistance.
Can I install the ONN Full Motion Spring Assisted TV Mount on a concrete wall?
Yes, you can install the ONN Full Motion Spring Assisted TV Mount on a concrete wall, but it may require additional hardware and expertise. Concrete walls require specialized anchors that can support the weight of the TV and the mount. You’ll need to purchase concrete anchors separately, as they are not typically included with the mount.
When installing the mount on a concrete wall, make sure to follow the manufacturer’s instructions for the concrete anchors. You may also need to consult with a professional for assistance, especially if you’re not familiar with working with concrete. Additionally, ensure that the concrete wall is strong enough to support the weight of the TV and the mount.
How do I adjust the ONN Full Motion Spring Assisted TV Mount to fit my TV?
The ONN Full Motion Spring Assisted TV Mount is designed to be adjustable, allowing you to customize the fit to your TV. To adjust the mount, you’ll need to loosen the screws that hold the TV plate in place. Then, slide the TV plate to the desired position and tighten the screws.
Make sure to adjust the mount carefully, as over-tightening the screws can damage the TV or the mount. Additionally, ensure that the TV is level and securely fastened to the mount before tightening the screws. If you’re unsure about adjusting the mount or if you encounter any issues, consult the manufacturer’s instructions or contact customer support for assistance.
Can I use the ONN Full Motion Spring Assisted TV Mount with a curved TV?
The ONN Full Motion Spring Assisted TV Mount is designed to work with flat-screen TVs, but it may not be compatible with curved TVs. The mount’s design and functionality are optimized for flat-screen TVs, and using it with a curved TV may compromise the mount’s stability and performance.
If you have a curved TV, it’s best to consult with the manufacturer or a professional to determine the best mounting solution. They can help you find a mount that is specifically designed for curved TVs and provide guidance on the installation process. Additionally, ensure that the mount you choose is compatible with your TV’s size and weight.
What is the warranty on the ONN Full Motion Spring Assisted TV Mount?
The ONN Full Motion Spring Assisted TV Mount typically comes with a limited warranty that covers defects in materials and workmanship. The warranty period varies depending on the manufacturer and the specific model, but most ONN Full Motion Spring Assisted TV Mounts come with a 1- to 5-year warranty.
To ensure that your mount is covered under warranty, make sure to register it with the manufacturer and keep the receipt and other documentation. If you encounter any issues with the mount during the warranty period, contact the manufacturer’s customer support for assistance. They will help you troubleshoot the issue or provide a replacement or repair, depending on the warranty terms.